Skip to content

We use cookies to understand how the site is used and to improve it. You can accept or decline. See our Privacy Policy.

COLLECTIVE STUDIO
AboutServicesCatalogueJournalFoundersContact

Popular pages

  • Free tech pack template
  • Low-MOQ clothing manufacturer
  • Custom hoodie manufacturer
  • Catalogue
  • MOQ calculator
  • Start your collection
Start your collection
AboutServicesCatalogueJournalFoundersContact
Start your collection
hello@collectivestudioltd.com+880 1980 055022
Free tool

CBM and Chargeable Weight Calculator

CBM means cubic metres: the space a shipment takes up. To calculate it, multiply a carton’s length, width and height in centimetres, divide by 1,000,000, and multiply by the number of cartons.

This calculator is made for cartons of clothing. Start from pieces and pieces per carton, or from cartons, and see the volume, the chargeable weight by air freight and by express courier, the sea freight figure, the share of a container and how many cartons fit in one. Centimetres, millimetres, metres or inches. No sign-up.

Units

The numbers below are an example to type over. There is no standard carton size, so use the outside measurements and packed weight of your own cartons. Switching units converts what you typed.

  1. cm
    cm
    cm
    kg
    Count by
    Cartons
    10
    Volume
    0.96 m³
    Gross weight
    120 kg
    Air chargeable
    160 kg
    Courier chargeable
    192 kg
    Sea, LCL
    0.96 m³

    One carton: 0.096 m³ (3.39 ft³), air volumetric 16 kg, courier volumetric 19.2 kg.

Total volume0.96 m³33.9 cubic feet. Length × width × height in cm ÷ 1,000,000, times the cartons.
Cartons10Across 1 carton size.
Gross weight120 kgThe actual weight, packaging included.

Chargeable weight by route

The greater of actual and volumetric
Air freight
160 kgVolume winsVolumetric 160 kg (cm³ ÷ 6,000) against 120 kg gross, compared across the whole shipment.
Express courier
192 kgVolume winsEach carton is billed on the greater of its own 12 kg and 19.2 kg volumetric (cm³ ÷ 5,000), then added up.
Sea freight, shared container (LCL)
0.96 m³Volume winsWeight or measure: 0.96 m³ against 0.12 tonnes, with 1 m³ counted as 1,000 kg.

Containers: share and carton count

Inside space only, no pallets
  • 20 ft 33.2 m³2.9%Up to 225 cartons, stacked loose (9 along, 5 across, 5 high). Your 10 cartons fit in one.
  • 40 ft 67.7 m³1.4%Up to 500 cartons, stacked loose (20 along, 5 across, 5 high). Your 10 cartons fit in one.
  • 40 ft high cube 76.3 m³1.3%Up to 600 cartons, stacked loose (20 along, 5 across, 6 high). Your 10 cartons fit in one.

The percentage is your cartons’ volume as a share of the container’s inside volume. The count is by dimensions: every carton turned the way that fits most, all the same way up, stacked loose with no pallets, inside the smallest length, width and height Hapag-Lloyd prints for that container (03/2016). It does not check the payload or the door opening. A real load can differ, so ask your forwarder for a load plan. How the count works.

Carton weight check

Guide figures, not legal limits
  • Carton size 1: 12 kg per carton. Within every maximum in the table below. Myer asks for cartons holding more than one unit to be kept below 12 kg where possible.

Each figure is a guide from the source named and applies only where that source says it does. See every figure and its source.

10 cartons come to 0.96 m³ and 120 kg gross. By air that is charged as 160 kg, by express courier as 192 kg, and by sea in a shared container on 0.96 m³.

Planning a production run?

Send these carton figures with your brief. We make from 150 pieces per style and per colour.

Send this as my brief

m³ = length × width × height in cm ÷ 1,000,000. Air volumetric kg = cm³ ÷ 6,000 (IATA general rule). Courier volumetric kg = cm³ ÷ 5,000 for each carton (DHL Express, UPS). Sea LCL counts 1 m³ as 1,000 kg. 1 in = 2.54 cm, 1 lb = 0.45359237 kg. Figures are shown before a carrier’s own rounding, and a carrier or contract can use a different divisor. Sources.

How CBM is calculated

CBM stands for cubic metre. It is the volume of a carton, or of a whole shipment, and it is the figure freight is planned around. The formula is short:

CBM = length (cm) × width (cm) × height (cm) ÷ 1,000,000

The divisor is 1,000,000 because a metre is 100 centimetres, and 100 × 100 × 100 is one million. Measure the outside of the packed carton, at its longest, widest and tallest points: IATA’s cargo handbook (page 32) multiplies the greatest length, width and height of the shipment or its packages. A worked example on the same page rounds each measurement to the nearest whole centimetre; it is shown in the example, not stated as a rule.

A worked carton, using an example size of 60 × 40 × 40 cm:

60 × 40 × 40 = 96,000 cm³
96,000 ÷ 1,000,000 = 0.096 m³ for one carton
0.096 × 10 cartons = 0.96 m³, which is 33.9 cubic feet

In inches, convert to centimetres first. One inch is exactly 2.54 cm (NIST), so a carton of 24 × 16 × 16 inches is 60.96 × 40.64 × 40.64 cm, or 0.1007 m³. Dividing cubic inches by 61,023.74 is the same sum in one step. For pounds, the tool uses 0.45359237 kg to the pound, which NIST’s conversion table lists to seven figures as 0.4535924. Sources read on 14 November 2026.

From pieces to cartons to cubic metres

A clothing order is counted in pieces, and freight is counted in cartons. The CBM calculators we read all start from cartons, so the first step is left to you. Divide the pieces by the pieces per carton and round up, because a part-filled carton still ships as a carton:

cartons = pieces ÷ pieces per carton, rounded up
total CBM = cartons × CBM of one carton
gross weight = cartons × weight of one packed carton

Here is an order of 300 pieces. The three packing figures are made up for the example: 24 pieces per carton, in cartons of 60 × 40 × 40 cm that weigh 12 kg packed. Type your own figures into the tool.

300 ÷ 24 = 12.5, so 13 cartons (12 full, and one holding 12 pieces)
13 × 0.096 = 1.248 m³
13 × 12 kg = 156 kg gross
Air volumetric: 13 × 16 kg = 208 kg, so 208 kg chargeable
Courier: 13 × 19.2 kg = 249.6 kg chargeable
Sea, shared container: charged on 1.248 m³, 3.8% of a 20 ft container by volume

The count is slightly generous on weight: the last carton is lighter than the rest, and the tool counts it at the full carton weight.

How many pieces fit in a carton depends on the garment, the fold and the carton, so we do not publish a typical figure. One published reference is Gildan, which prints the case pack on the spec sheets for its stock blanks: 72 pieces for sizes S to 2XL of its 180 g/m² adult T-shirt, 36 pieces for S to 3XL of its 280 g/m² crewneck sweatshirt, and 24 pieces for S to 3XL of its 280 g/m² hooded sweatshirt (sheets headed Activewear Europe 2026, hosted by the UK distributor Pencarrie, read on 14 November 2026). Those are stock garments packed by a large manufacturer, and the sheets give no carton size or weight. They do show the pattern: the heavier the garment, the fewer pieces per carton. At those pack sizes, 300 T-shirts would be 5 cartons, 300 crewneck sweatshirts 9 and 300 hooded sweatshirts 13.

Our minimum is 150 pieces per style and per colour. The MOQ calculator works out the piece count across your styles and colours, and the purchase order template has a packing section where pieces per carton and carton marks are written down for the factory.

Air freight: volumetric and chargeable weight

Air freight is charged on weight or on size, whichever is greater. The size is turned into a weight, called volumetric weight:

volumetric weight (kg) = length × width × height (cm) ÷ 6,000
chargeable weight = the greater of actual weight and volumetric weight

IATA describes dividing the volume in cubic centimetres by 6,000 as the general rule, and says the higher of volumetric and actual weight is the one used. Its cargo handbook gives the same divisor, with 366 for cubic inches. Dividing by 6,000 counts one cubic metre as 166.67 kg, which forwarders such as ICE Cargo in Australia round to 167 kg.

The ten example cartons:

Volume: 10 × 96,000 cm³ = 960,000 cm³
Volumetric weight: 960,000 ÷ 6,000 = 160 kg
Actual weight: 10 × 12 kg = 120 kg
Chargeable weight: 160 kg, because 160 is the greater

Put another way, a 60 × 40 × 40 cm carton has to weigh more than 16 kg before its actual weight counts by air. Below that, the chargeable weight follows the size of the carton: a smaller carton lowers it, and a lighter one does not.

Two limits on this rule. DHL Global Forwarding writes that carriers sometimes apply a different density ratio, and IATA’s handbook points to its tariff rules, which we have not read because they are a paid publication. And DHL’s air formula multiplies one package by the number of packages and compares totals, so the tool compares the whole shipment for air freight. That is our reading of the formula, not a rule we can quote; ask your forwarder how they compare. IATA’s worked example also rounds the result up to the next whole kilogram. Sources read on 14 November 2026.

Express couriers and why the divisor differs

Express couriers use the same idea with a smaller divisor, and they apply it to every carton on its own:

volumetric weight (kg) = length × width × height (cm) ÷ 5,000, for each carton
chargeable weight = the greater of that carton’s actual and volumetric weight, added up

DHL Express states the 5,000 divisor on its UK page, says each package is calculated separately, and says the chargeable weight is the greater of actual and volumetric. Its Dutch site puts the same rule as one cubic metre counting as 200 kg. UPS states 5,000 in its Italian packaging guide (2024) and in its 2026 Rate and Service Guide for Malaysia. That guide also rounds each dimension up to the next whole centimetre, and on Express services it rounds a weight up to the next half kilogram, or to the next whole kilogram for a shipment over 20 kg. On UPS Expedited it rounds up to the next whole kilogram.

Why 5,000 and not 6,000? Neither courier explains it, and we will not guess. What the sources do show is where each number comes from: 6,000 is IATA’s general rule for air cargo, and 5,000 is a factor each courier publishes for its own network. The effect is plain arithmetic. The smaller divisor gives a fifth more volumetric weight for the same carton:

One carton by courier: 96,000 ÷ 5,000 = 19.2 kg volumetric, against 12 kg actual
Chargeable: 19.2 kg a carton, so 10 cartons = 192 kg
The same ten cartons by air freight: 160 kg

Carton by carton matters when sizes are mixed. Add five dense cartons of 40 × 30 × 20 cm at 18 kg to the ten above. By air freight the totals are compared: 180 kg volumetric against 210 kg actual, so 210 kg. By courier each carton stands alone: the light ones are charged at 19.2 kg and the dense ones at 18 kg, which adds up to 282 kg.

The 5,000 figure is not universal either. DHL says it applies to most of its international express shipments, and we read UPS’s figure in guides for two countries, not on its UK or Australian pages, which we could not open. Other couriers publish their own factors, so check the one you use. Sources read on 14 November 2026.

Sea freight: weight or measure

When your cartons share a container with other cargo, called less than container load or LCL, the charge is on weight or measure, written W/M. One cubic metre is counted as 1,000 kg, and the greater figure is used:

compare volume in m³ with weight in tonnes (kg ÷ 1,000)
the charge is on whichever number is greater

DHL Global Forwarding describes LCL in those terms and adds that the volume is usually the larger of the two. A carrier tariff filed by Blue Anchor America Line, a trading name of Kuehne + Nagel Inc., sets the same thing out as a rule (Rule 2-C): a weight ton of 1,000 kilos or a measurement ton of one cubic metre, whichever produces the greater charge. Its definitions (Rule 28-A) call either unit a revenue ton. We cite it because it states the rule in full.

Ten example cartons: 0.96 m³ against 0.12 tonnes
Charged on 0.96 m³, by volume

For weight to win, cargo has to be heavier than 1,000 kg per cubic metre. The example carton would need to weigh more than 96 kg. So for cartons like these the volume is the figure to get right: an extra 5 cm of height raises the chargeable figure, and an extra kilogram does not.

A full container is different. DHL notes that for a full container load a charge per container replaces the charge by volume. Sea freight is also the slower route: an order takes about 70 days from order to door by air, and sea adds about a month. The launch date calculator counts that back from the day you want to be on sale, and our guide to shipping bulk clothing orders covers shared and full containers and the Incoterms. Sources read on 14 November 2026.

How much of a container that is, and how many cartons fit

The tool gives two figures for each of three standard containers: your cartons as a share of the inside volume, and how many cartons of your size fit by their dimensions. Both use the figures Hapag-Lloyd prints in its container specification.

ContainerInside length × width × heightInternal volumeTen example cartons (0.96 m³)60 × 40 × 40 cm cartons that fit, loose
20 ft general purpose5,900 × 2,352 × 2,393 mm33.2 m³ (1,172 ft³)2.9%225
40 ft general purpose12,029 × 2,350 × 2,392 mm67.7 m³ (2,391 ft³)1.4%500
40 ft high cube general purpose12,032 × 2,342 × 2,700 mm76.3 m³ (2,695 ft³)1.3%600
Source: Hapag-Lloyd, Container Specification, dated 03/2016, pages 9, 11 and 13, first series listed for each type (wooden floor), read on 14 November 2026. Where the brochure prints more than one inside length, width or height for that series, the table and the tool use the smallest: for the 40 ft high cube it lists widths of 2,432, 2,352 and 2,342 mm, and 2,342 is used. Cubic feet are converted from the cubic metres.

The carton count works like this. A carton can lie six ways. For each way, divide the container’s inside length by the carton side lying along it and round down, do the same across and upwards, and multiply the three answers. The best of the six ways is the count. For the example carton in a 20 ft container:

5,900 ÷ 600 = 9.83, so 9 along
2,352 ÷ 400 = 5.88, so 5 across
2,393 ÷ 400 = 5.98, so 5 high
9 × 5 × 5 = 225 cartons

Turning a carton can matter. A carton of 30 × 59 × 40 cm laid as typed fits 19 × 3 × 5 = 285 in a 20 ft. Turned with the 40 cm side along the container, 30 cm across and 59 cm upright, it fits 14 × 7 × 4 = 392. When your cartons need more than one container, the tool says how many: 300 of the example cartons need 2 of the 20 ft (300 ÷ 225 = 1.33, rounded up), or 1 of the 40 ft. With more than one carton size, it adds up the share of a container each size would take on its own, which is a rough figure.

Read both figures with five cautions.

  • Real loading is lower than the share. Cartons never fill every gap at the walls, the roof and the doors. We found no carrier that publishes a usable volume, so the tool does not invent one. Treat the share as the least space your cartons can take.
  • The count is geometry, not a load plan. It stacks every carton the same way, loose, with no pallets, and takes every carton to be exactly the size typed. A loader who turns some cartons to fill the leftover space may fit a few more, and cartons that bulge fit fewer. It does not check the door opening or the payload. Ask your forwarder for a load plan.
  • The figures are nominal. The brochure says its dimensions are nominal and that the series shown are a sample of the fleet. Another 20 ft series in the same table holds 33.0 m³. DHL Global Forwarding gives about 33 m³ for a 20 ft and about 76 m³ for a 40 ft high cube, and says measurements differ between models and makers.
  • The brochure is from 2016. We could not open a current equipment page from any carrier on the day we checked, so we cannot confirm these are today’s figures.
  • Weight is a separate limit. The brochure prints a maximum payload for each series, and it varies from 26,700 kg to 30,250 kg across the general purpose series it lists. It also says road and rail weight limits have to be checked locally. The tool leaves payload out for that reason. At 12 kg a carton, the 225 example cartons that fit a 20 ft weigh 2,700 kg, so for cartons like these the space runs out long before the weight limit.

When is a full container worth asking about? DHL Global Forwarding says a shared container is very likely to be the cheaper route when the cargo is under 20 m³, on a common trade lane with direct services. Your forwarder can quote both. Sources read on 14 November 2026.

Carton weight and handling guides

Weight matters for more than freight. Retailers and couriers publish limits for a single carton, and every carton is lifted by someone. The tool compares the gross weight of each carton with the figures below. None of them is a general legal limit. Each is a guide or a rule from the source named, and applies only where that source says.

SourceFigureWhat it covers
UK Health and Safety Executive, INDG143 (rev4)25 kg for men, 16 kg for womenLifting and lowering guide figures for a load held close to the body, between knuckle and elbow height. Lower figures apply at arm’s length (15 kg and 10 kg), at shoulder height and near the floor.
Safe Work Australia, Hazardous manual tasks model code of practice, October 2018No figure in kilogramsWe found no weight limit for lifting in the code. It treats the size, shape and weight of a load as risk factors and suggests buying products in smaller loads.
Myer, Receiving Standards, April 202516 kg maximum; below 12 kg where possibleCartons delivered to this Australian department store. The 12 kg line is for cartons holding more than one unit. Maximum carton size 45 cm high, 50 cm wide and 70 cm deep.
URBN, vendor site for Europe15 kgCartons sent to URBN in Europe, unless a single unit weighs more. A heavier carton holding more than one unit needs URBN’s approval and a two-person lift mark.
Amazon FBA, UK and four EU countries22.7 kgBox weight in Amazon’s announcement of limits from 20 June 2025, with a box of up to 91.4 × 63.5 × 63.5 cm. We did not see Amazon’s current help page, so confirm in Seller Central.
UPS, Italian packaging guide, 2024Over 25 kgA package with an actual weight above this gets additional handling. So does one with a longest side over 100 cm.
UPS, 2026 Rate and Service Guide, Malaysia70 kgMaximum weight per package.
DHL Express, packing guideOver 25 kgThe box strength table stops at 20 to 25 kg for double-wall board. Above that the guide calls for a specialist packing method.
All read on 14 November 2026. The HSE says its figures are not safe limits and that the regulations set no specific weight limit (HSE risk filters page).

The pattern in what we read: retailer carton limits sit between 15 kg and about 22.7 kg, and the HSE guide figures for a load held close are 16 kg and 25 kg. A carton of 15 kg or less is within every retailer maximum in the table, and Myer also asks for less than 12 kg where possible. Carton size is ruled on too. URBN’s preferred cartons are 595 × 289 × 390 mm and 394 × 292 × 191 mm, and it accepts another size when a product does not fit.

If your goods go to a retailer or a fulfilment warehouse, ask for its routing guide and send it with your order, before the goods are packed.

Where the carton figures come from

Packing is the last step on our floor in Narayanganj. Each finished garment is folded to the size of its bag and sealed, and the bagged pieces are counted into cartons. A carton can hold one size and colour or a mix, to the buyer’s instructions. After inspection the cartons are sealed and marked, and a packing list records what is in each one. The numbers to type into the tool are the outside size and the packed weight of a carton. Before the goods are packed, any figure is an estimate, so run a low and a high case.

Finished tees being folded and bagged on our floor. The fold sets the bag size, and the bag size sets how many pieces fit in a carton. Video page: Folding and bagging finished garments

Common mistakes

  • Measuring the inside of the carton. Carriers measure the outside, at the greatest length, width and height. A carton that bulges when packed is measured at the bulge.
  • Forgetting that couriers bill each carton. A courier does not let a dense carton offset a light one. Work out the chargeable weight of each carton, then add them.
  • Mixing units. Inches typed into a centimetre formula give a volume about sixteen times too small, because 2.54 cubed is 16.39. Pounds read as kilograms more than double the weight. Pick one system and keep to it.
  • Using the wrong divisor. At least one online calculator, cbmcalculator.com, gives cm³ ÷ 5,000 as the international formula for air cargo in its explanation (read on 14 November 2026). IATA’s own pages give 6,000 as the general rule. The 5,000 figure is the one express couriers such as DHL Express and UPS publish.
  • Using the weight of the garments alone. Actual weight is gross weight: DHL defines it as the total physical weight including packaging and pallets. Polybags, cartons and tape all count.
  • Rounding cartons down. 300 pieces at 24 a carton is 13 cartons, not 12.5. The thirteenth carton takes the same space as the others.
  • Reading container volume as loading space. 33.2 m³ is the inside of the box, not the volume of cartons that fits in it.
  • Forgetting the carrier’s rounding. UPS’s guide for Malaysia rounds each dimension up to the next whole centimetre and each weight up to the next half or whole kilogram, and IATA’s worked example rounds a volumetric weight up to the next kilogram. So the billed weight can be a little above the plain sum. Your quote states the rule that applies.

What the tool leaves out

It gives volumes, weights and a carton count only. It does not quote freight, because rates change with the lane, the season and the forwarder. It does not round as a carrier would or add the volume of pallets, and its container count stacks every carton the same way rather than planning a real load. It checks carton weight against the guides above and nothing else.

For the money side of a shipment, the landed cost calculator adds duty, import tax and customs fees to figures you enter. Our import guides for the UK, the EU and Australia cover what is filed and paid at the border. To start an order, send us your brief and we will reply within one business day.

HWritten by Homaira Jashim, Co-Founder, Collective Studio · Published November 2026

What clients say

I have had a very good experience with this company. They are very friendly, professional, and provide fast service. They speak fluent English, which makes communication very easy. The quality of their manufacturing is excellent. I have no doubt in recommending this company to anyone looking for a reliable manufacturing partner in Bangladesh.
Burney Vaz DiasNetherlands
Wonderful people to work with — very professional and knowledgeable, also accommodating to the needs of their customers.
Ian SteinerFriendly Line Ltd, United Kingdom
Read every review on Google ↗ (opens in a new tab)

Frequently asked questions

How do I calculate CBM?

Measure the outside of the packed carton at its longest, widest and tallest points, in centimetres. Multiply the three figures together and divide by 1,000,000. The answer is the volume of one carton in cubic metres, which freight forwarders write as CBM. A carton of 60 by 40 by 40 cm is 96,000 cubic centimetres, so it is 0.096 CBM. Then multiply by the number of cartons: ten of them come to 0.96 CBM. If you measured in metres, skip the division: 0.6 times 0.4 times 0.4 is also 0.096. The divisor is 1,000,000 because a metre is 100 centimetres, and 100 times 100 times 100 is one million. IATA's cargo handbook says to multiply the greatest length, width and height of the shipment or its packages, so measure a bulging carton at the bulge. Do the sum for each carton size separately and add the results together.

How do I calculate CBM in inches?

Convert each measurement to centimetres first, by multiplying by 2.54, then use the usual formula: length times width times height, divided by 1,000,000. One inch is exactly 2.54 centimetres, so nothing is lost in the conversion. A carton of 24 by 16 by 16 inches is 60.96 by 40.64 by 40.64 cm, which comes to about 0.1007 cubic metres. You can also multiply the three figures in inches and divide by 61,023.74, the number of cubic inches in a cubic metre, which gives the same answer: 6,144 cubic inches divided by 61,023.74 is 0.1007. For cubic feet, divide cubic inches by 1,728. One mistake to watch for is mixing the two systems, such as typing inches into a calculator set to centimetres. That makes the volume about sixteen times too small, because 2.54 cubed is 16.39. The calculator on this page converts for you when you pick inches and pounds.

What is the difference between actual, volumetric and chargeable weight?

Actual weight, also called gross weight, is what the packed shipment weighs on a scale, with cartons, bags and any pallets included. Volumetric weight is a weight worked out from the size of the shipment, so that light, bulky cargo is charged for the space it takes. For air freight it is the volume in cubic centimetres divided by 6,000. Chargeable weight is whichever of the two is greater, and it is the figure a rate is applied to. So chargeable weight is never lower than actual weight, and it is higher only when the cargo is light for its size. Ten cartons of 60 by 40 by 40 cm weighing 12 kg each have an actual weight of 120 kg and a volumetric weight of 160 kg, so the chargeable weight by air is 160 kg. If the same cartons weighed 18 kg each, the actual weight of 180 kg would be the greater and would be charged.

Why is the divisor 6,000 for air freight and 5,000 for couriers?

They come from different rule makers. IATA, the airlines' trade body, gives 6,000 as the general rule for air cargo: divide the volume in cubic centimetres by 6,000, which counts one cubic metre as 166.67 kg. Express couriers publish their own factor for their own networks. DHL Express and UPS both state 5,000 for dimensions in centimetres, which counts one cubic metre as 200 kg. Neither source explains why the figures differ, so we do not guess. The effect is easy to see, though: the smaller divisor gives a fifth more volumetric weight for the same box. A carton of 60 by 40 by 40 cm has a volumetric weight of 16 kg by air freight and 19.2 kg by courier. Neither figure is fixed for every service. IATA calls 6,000 a general rule, DHL says 5,000 applies to most of its international express shipments, and a contract can set another divisor. Check which one your quote uses.

How many CBM fit in a 20 ft or 40 ft container?

By internal volume, a 20 ft general purpose container holds 33.2 cubic metres, a 40 ft holds 67.7 and a 40 ft high cube holds 76.3. Those are the capacities Hapag-Lloyd prints in its container specification, dated March 2016, and the same brochure says the figures are nominal and the series shown are a sample of its fleet. DHL Global Forwarding gives about 33 and about 76 cubic metres for the 20 ft and the 40 ft high cube. You cannot load all of that space with cartons, because cartons leave gaps at the walls, the roof and the doors. We found no carrier that states a usable volume, so this page does not give one. The calculator shows your cartons as a share of the internal volume, which is the least space they can take, and it also counts how many cartons of your size fit by dimensions, stacked loose with no pallets: 225 cartons of 60 by 40 by 40 cm in the 20 ft, 500 in the 40 ft and 600 in the high cube. That count is geometry, not a loading plan. For a real plan, give your forwarder the carton sizes and counts and ask how many fit.

How many kilograms is 1 CBM in sea freight?

For a shared container, known as less than container load or LCL, one cubic metre is counted as 1,000 kg, which is one tonne. The forwarder compares the volume in cubic metres with the weight in tonnes and charges on whichever is greater. This is called weight or measure, written W/M, and the carrier tariff from Blue Anchor America Line cited below calls either unit, 1,000 kg or one cubic metre, a revenue ton. Ten cartons of 60 by 40 by 40 cm at 12 kg each are 0.96 cubic metres and 0.12 tonnes, so they are charged on 0.96 cubic metres. Weight only wins when cargo is heavier than 1,000 kg per cubic metre. The example cartons come to 125 kg per cubic metre, so volume wins by a wide margin, and DHL Global Forwarding notes that volume is usually the larger of the two. For cartons like these, the volume is the figure to get right. A full container is different: it is charged per container, not by volume or weight.

How do I work out CBM for cartons of different sizes?

Treat each carton size as its own line. Work out the volume of one carton, multiply by how many cartons of that size you have, and then add the lines together. Do the same for gross weight. Say an order ships in ten cartons of 60 by 40 by 40 cm and five cartons of 40 by 30 by 20 cm. The first line is 10 times 0.096, which is 0.96 cubic metres. The second is 5 times 0.024, which is 0.12. Together they are 1.08 cubic metres. Never average the dimensions and multiply once, because volume does not average that way. The chargeable weight then depends on the route. Air freight compares the total volumetric weight with the total gross weight. Couriers compare carton by carton, so each size keeps its own result. The calculator on this page takes up to ten carton sizes and shows each line and the total.

Do carriers round the dimensions and the weight up?

Often, yes, which is why a bill can be slightly higher than your own sum. IATA's cargo handbook shows it in a worked example rather than stating a separate rule: the example rounds each dimension to the nearest whole centimetre, a half or more going up, and rounds a volumetric weight of 593.89 kg up to 594 kg. UPS states its rules in its 2026 guide for Malaysia: each dimension is rounded up to the next whole centimetre, and on Express services a fraction of a weight goes up to the next half kilogram, or to the next whole kilogram for an Express shipment over 20 kg. For UPS Expedited it goes up to the next whole kilogram. Because couriers work carton by carton, the rounding of each carton's weight adds up across the shipment. The calculator on this page shows figures before any rounding, so you can see the plain arithmetic. To estimate a billed weight, round each carton's chargeable weight up as your carrier does, then add the cartons together. Your forwarder's or courier's quote will state the rule that applies to your shipment, so read that line before you compare two quotes.

Sources

Every source below was read on 14 November 2026. We paraphrase them: none of the wording on this page is a direct quotation. Divisors and limits change, and a carrier’s own quote always decides.

  • IATA Knowledge Hub: Air Cargo Tariffs and Rules, What You Need to Know (27 July 2021); read 14 November 2026
  • IATA European Air Cargo Programme Handbook, Edition 22 (effective 1 October 2024), page 32, volume weight; read 14 November 2026
  • DHL Global Forwarding: calculating chargeable weight by air, ocean, road and rail; read 14 November 2026
  • DHL Global Forwarding: the cost drivers of less than container load rates; read 14 November 2026
  • DHL Global Forwarding: cargo container sizes and types; read 14 November 2026
  • DHL Express UK: weight and dimensions; read 14 November 2026
  • DHL Express Netherlands: how do I calculate volumetric weight; read 14 November 2026
  • DHL Express: what is dimensional weight; read 14 November 2026
  • DHL Express packing guide (PDF); read 14 November 2026
  • UPS Italy: How to ship your goods correctly, packaging guide (PDF, 2024); read 14 November 2026
  • UPS: 2026 Rate and Service Guide, Malaysia, effective 7 June 2026 (PDF), billable weight and multiple-piece shipments; read 14 November 2026
  • Blue Anchor America Line (Kuehne + Nagel Inc.): FMC Tariff No. BAAJ-001, rules tariff, Rule 2-C and Rule 28-A (PDF); read 14 November 2026
  • Hapag-Lloyd: Container Specification brochure (PDF, dated 03/2016), pages 9, 11 and 13, general purpose containers; read 14 November 2026
  • ICE Cargo: understanding chargeable weights (28 October 2022); read 14 November 2026
  • NIST: SI units of length, the inch is exactly 25.4 mm; read 14 November 2026
  • NIST Guide to the SI, Appendix B.8: pound (avoirdupois) to kilogram; read 14 November 2026
  • UK Health and Safety Executive: Manual handling at work, a brief guide, INDG143 (rev4) (PDF); read 14 November 2026
  • UK Health and Safety Executive: manual handling risk filters; read 14 November 2026
  • Safe Work Australia: Hazardous manual tasks, model Code of Practice (PDF, October 2018); read 14 November 2026
  • Myer: Supply Chain Receiving Standards (PDF, April 2025); read 14 November 2026
  • URBN vendor site, Europe: carton packing requirements; read 14 November 2026
  • Amazon Seller Central Europe forum: maximum box length for FBA orders to increase (News_Amazon); read 14 November 2026
  • Gildan 5000 Heavy Cotton Adult T-Shirt spec sheet, hosted by Pencarrie; read 14 November 2026
  • Gildan 18000 Heavy Blend Adult Crewneck Sweatshirt spec sheet, hosted by Pencarrie; read 14 November 2026
  • Gildan 18500 Heavy Blend Adult Hooded Sweatshirt spec sheet, hosted by Pencarrie; read 14 November 2026
  • cbmcalculator.com: CBM calculator home page, volumetric weight section; read 14 November 2026

Ask about your order

COLLECTIVE
STUDIO
Head Office Plot-A-132, Road No. 02
BSCIC Industrial Area
Panchabati, Narayanganj 1420
Bangladesh
Australia Desk 3/1 Taylor Court
Cooroy QLD 4563
Australia
Branch Office Soetendaal 61
1081 BN Amsterdam
Netherlands

Garments

Knitwear & cut-and-sewT-shirtsPrivate-label teesPolo shirtsTank topsHoodiesSweatshirtsJoggersShortsStreetwearActivewearLeggingsLoungewearSwimwearBeachwearWomen’sMen’sKidswearUnderwearCaps & bagsWorkwear & uniforms

Finish & certify

Screen printingDTF & DTG printingEmbroiderySublimationCustom dyeingCustom merchOrganic cottonGOTS-certifiedSustainable

How we work

Low MOQ from 150Cut and sewCustom clothingPrivate labelWholesale & bulkClothing manufacturer in BangladeshFor startupsFor boutiquesFor gyms & studiosFor creators & YouTubersBrowse everything we makeSister company: CMB Sourcing ↗

Markets

For US brandsFor UK brandsFor EU brandsFor German brandsFor Australian brandsFor Canadian brandsFor Dutch brandsFor French brandsFor Italian brandsAll European markets

Studio

Start here (new brands)Factory profileFactory videosWhat to expect from usCertificationsSustainabilityBuyer questionsAbout usPortfolioFoundersPress kitFree tools & guides

Connect

Instagram LinkedIn Facebook WhatsApp Find us on Google hello@collectivestudioltd.com +880 1980 055022 +61 481 854 564 (Australia)
© 2026 Collective Studio Ltd · Knitwear manufacturing, Bangladesh.
PrivacyTerms