How to fill in a tech pack, section by section

A walkthrough of our free tech pack template: what goes in each of the nine sections, from the style summary to sign-off, then the filled-in Excel example.

Length
1:08, no sound
Made from
Made from the pages of our tech pack template

What you are seeing

The video moves down the three pages of our free template one section at a time, outlines it, and picks out the field that matters most: the version number, the GSM column, the Pantone reference, the tolerance column, stitches per inch, label placement and the sign-off.

It ends on the Excel version, where every box already holds an example value for an invented brand's T-shirt to type over. Both files are free to download from the template page, with no sign-up.

The measurement table lists the points most knit tops need: chest width taken 1 cm below the armhole, body length from the high point of the shoulder (HPS) to the hem, shoulder width, sleeve length, sleeve opening, neck width and bottom hem width, with a column for each size from XS to 2XL. The construction table goes area by area (neckline, shoulder seam, side seam, sleeve or cuff, hem), and the last section asks for quantity per size and colour, total units, target launch date and who approved the pack.

Saying where each measurement is taken matters as much as the number. A chest width measured at the armhole and one measured lower down are different figures, and a factory checking one while you checked the other will report a fault that isn't there. In the Excel example the one-line description reads like a short brief, a boxy heavyweight tee with a dropped shoulder and a 2 cm rib neckband, which tells the pattern maker the fit before they open the sketch.

How a factory reads the pack, stage by stage

A tech pack is not read once and filed. It is opened at every stage of an order, and each stage leans on different sections. At quote stage the bill of materials, the construction table and the quantity per colour do most of the work, because fabric composition, weight in GSM, decoration and the colour split are what drive cost. The sketch matters less until a sample is cut.

At sampling, the pattern maker works from the sketch, the points of measure and the sample size. Sampling takes about 10 days, and a pack that answers the questions up front is what keeps it to one round rather than two. Our guide to how clothing sampling works follows a sample from the pack to sign-off.

In bulk, the approved version becomes the reference for everything. Fabric is booked against the bill of materials and the colourways, the line is set up from the construction table, and the tolerance column is what in-line checks and the final AQL inspection measure against. The packaging section is read last, at the end of the line, which is why it is so often left blank and then needed in a hurry.

What changes the quote, and what can follow later

Some fields change the price or the timeline, and those are worth settling before you send the pack. Composition and GSM, the decoration method (screen print, DTF, embroidery), the number of colourways and the quantity per colour all move the quote. Our minimum is 150 pieces per style and per colour, so the quantity table in section 9 tells us at a glance whether the split works.

Other fields can follow during sampling without holding anything up: the final label artwork, the fold method, the barcode files and the carton count. They must all be in the pack before bulk starts, because a label that arrives late holds a finished run on the packing table. The free tech pack checklist separates the two groups if you want a tick-list beside the form.

Keeping the pack and the sample in step

The most common reason a bulk order differs from what a brand expected is a change agreed by email or message that never made it into the pack. Every comment on a sample should become a new version with a new number, so that the sample you approve and the document it was approved against carry the same version. Bulk is then checked against that version and nothing else.

If you are making one garment type, the garment-specific versions save time, because their points of measure already name that garment's parts. The T-shirt tech pack template adds armhole, bicep, neck drop and neckband width to the general list, and the pre-production sample guide explains how the last sample before bulk is signed off against the pack.

Where this clip appears

How to fill in a tech pack, section by section: questions brands ask

Who should fill in the tech pack, the brand or the factory?

The brand fills in the decisions and the factory fills in the method. Only you can say what the garment is for, how it should fit, which colours it comes in, what goes on the label and how many of each size you want. Those fields are yours, and a factory that guesses them is designing your product for you. The technical method is different. Stitch types, stitches per inch, seam allowances and the grade between sizes are things a factory sets every day, so leave them blank if you are unsure and we propose them from our standard construction for that garment. Then read what comes back. Every value we add appears in the next version of the pack, and the sample is made to that version, so you approve the method by approving the sample. What matters is that nothing important is left to a phone call that nobody wrote down.

What should I do if my sample does not match my tech pack?

Check which version of the pack the sample was made from before you do anything else. Many apparent mistakes turn out to be a sample cut from an older version, and that changes the conversation. Then measure the sample flat against the points of measure and compare each reading with its tolerance, not with the exact figure: a point inside tolerance is a match. List every difference as a numbered comment, with a photo where it helps, and separate faults in the making, such as a crooked seam, from changes of mind, such as a longer body. Both are fine to raise, but they are fixed in different ways. We reply with what we will change, the corrected pack becomes the next version and the next sample is made to it. Each extra round adds time before production starts, and production runs 40 to 50 days after the sample is approved.

Is there a video showing how to fill in a tech pack?

Yes. Collective Studio's tech pack walkthrough is a 68-second silent video that moves through our free template one section at a time, with a caption explaining what to fill in for each of the nine sections. It picks out the field that matters most in each section: the version number, the GSM column, the Pantone reference, the tolerance column, stitches per inch, label placement and the sign-off. It ends on the Excel version, where every box already holds an example value for an invented brand's T-shirt, so you can see a finished pack before you start your own. The template comes as a three-page A4 PDF and a matching Excel workbook, both free to download from the template page with no sign-up. Watch the video once through, then open the Excel file and type over the example values with your own garment's details.

What are the nine sections of a tech pack template?

Collective Studio's template has nine sections: style summary, technical sketch, bill of materials, colourways, points of measure, construction and stitching, labels and branding, packaging, and order and approvals. The order roughly follows how a factory reads the pack: what the garment is, what it is made from, what size it is, how it is sewn and how it is finished. The style summary carries the version number and a one-line description. The bill of materials lists every fabric and trim with composition, GSM, colour and supplier. Colourways give Pantone references. Points of measure list each measurement with a tolerance, per size. Construction goes area by area through the garment. Labels and packaging say what goes where. The last section records quantity per size and colour, total units, target launch date and who signed off the version that went into production.

Why does a tech pack need to say where each measurement is taken?

Because the same measurement taken in two places gives two different numbers, and a factory checking one while you checked the other will report a fault that does not exist. Chest width is the clearest example. In Collective Studio's template it is taken 1 cm below the armhole, and a chest measured right at the armhole comes out different. Body length is taken from the high point of the shoulder to the hem, not from the neck seam or the collar. That is why the measurement table describes each point of measure as well as giving a number, and why every point carries a tolerance. The measurement table in the template lists chest width, body length, shoulder width, sleeve length, sleeve opening, neck width and bottom hem width, with a column for each size from XS to 2XL. Measure your own reference garment the same way before you fill it in.

What does HPS mean in a tech pack?

HPS stands for high point of the shoulder, the point where the shoulder seam meets the neckline, and it is the fixed starting point for many garment measurements. Because it exists on every size and every style of top, it gives the factory and the brand the same place to measure from. In Collective Studio's tech pack template, body length is measured from the HPS straight down to the hem. The same point is often used to place things that must sit at a set height: a chest print, a pocket or a colour-blocked panel, given as a distance down from the HPS. Measuring from the neck seam or the collar instead gives a different figure, especially on a garment with a wide neckband or a hood. When you fill in a tech pack, say HPS in the description of each measurement that starts there, so nobody has to guess.

Which tech pack details can I finish after sampling has started?

Final label artwork, the fold method, barcode files and carton counts can follow during sampling, but fabric composition, GSM, decoration method, colourways and quantity per colour should be settled before you send the pack. The first group does not change the price or the timeline, so it can be completed while the sample is being made. The second group drives the quote: fabric and weight, whether the design is screen printed, DTF or embroidered, how many colours you want and how many of each. Collective Studio's minimum is 150 pieces per style and per colour, so the quantity table tells us at once whether your colour split works. Everything in the first group must be in the pack before bulk starts, though, because a label that arrives late holds a finished run on the packing table. The free tech pack checklist separates the two groups if you want a tick-list.

What is the tolerance column in a tech pack?

The tolerance column gives how far each finished measurement may vary above or below the stated figure and still count as correct. No two knitted garments come out exactly the same size, because fabric stretches and relaxes and seams are sewn by hand, so a tech pack needs an acceptable range for every point of measure. A chest given with a tolerance can be checked as a pass or a fail, while a chest given as a single figure cannot. In Collective Studio's template, the tolerance sits beside every point of measure, and the walkthrough video picks it out as the field that matters most in that section. It is what in-line checks and the final AQL inspection measure bulk pieces against. Set tolerances that are realistic for knitwear: tighter on small points such as neck width, looser on large ones such as body length. Our size chart guide explains how to choose them.